Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Honda CR-V?

Model: Honda CR-V MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Light bulb

See other generations:
Video tutorial

To replace the front headlamp bulb on a Honda CR-V, remove the rivets located at the top of the bumper and inside the wheel arch corresponding to the headlamp to be removed. Next, using a socket wrench, loosen the bolts located at the bottom of the headlamp.

Additional securing clips will be found at the back of the headlamp, accessible from the engine compartment. Once these are removed, disconnect the connector and remove the headlamp from its housing.

This can be opened from the rear by removing the protective cap, allowing the bulb inside to be extracted and replaced.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Honda CR-V?
How to Replace the Front Headlamp Bulb on a Honda CR-V?
Honda CR-V (2007-2012 / MK 3) To replace the front headlamp bulb on a Honda CR-V, open the bonnet to access the components inside the engine bay: inside the headlamp, there will b…
How to Replace the Headlight Bulb on the Honda CR-V
How to Replace the Headlight Bulb on the Honda CR-V
Honda CR-V (2012-2017 / MK 4) If you intend to replace a headlight bulb yourself on this model, the description below outlines the steps to perform the replacement. After opening …
How to Replace a Front Headlamp Bulb on the Honda CR-V
How to Replace a Front Headlamp Bulb on the Honda CR-V
Honda CR-V (2017-2022 / MK 5) To replace a front headlamp bulb on your vehicle, follow these steps: open the bonnet, locate the headlamp containing the bulb to be replaced. At the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos