Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Light Bulb in a Honda CR-V

Model: Honda CR-V MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Interior dome light bulb

See other generations:
Video tutorial

In this video, see how to replace the bulb in the interior light of a Honda CR-V. Use a screwdriver to pry between the light unit and the plastic trim on the roof panel (without breaking anything), then pull the plastic of the light unit out from the panel and disconnect the power connector.

Replace the damaged bulb with a new one (same size and voltage).

Refit the light unit into its housing (push the transparent plastic with your hands until the clips lock into the side plastic). Test the correct operation of the light unit after replacement.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

Replacing Interior Light Bulb on Honda CR-V
Replacing Interior Light Bulb on Honda CR-V
Honda CR-V (2012-2017 / MK 4) Learn how to replace the bulbs in the interior lights on a Honda CR-V. Remove the protective covers from above the car's interior lights. Pry between…
How to replace the third brake light bulb on the Honda CR-V?
How to replace the third brake light bulb on the Honda CR-V?
Honda CR-V (2007-2012 / MK 3) To replace the third brake light bulb on the Honda CR-V, open the tailgate to access the panel located at its upper interior. Once this panel is remo…
How to Replace the Headlight Bulb of a Honda CR-V
How to Replace the Headlight Bulb of a Honda CR-V
Honda CR-V (2002-2007 / MK 2) The steps to replace the headlight bulb of a Honda CR-V mk2 are very simple to perform independently. First, open the front bonnet. Second, disconnec…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos