Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Front Side Window Seal on a Honda Civic

Model: Honda Civic MK 8 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the front side window seal on a Honda Civic, fully lower the window using the appropriate button. At this point, using a lever tool, detach the seal.

This will be fixed to the base of the glass with two retaining clips located at both ends of the glass length. Once the outer seal is removed, you can proceed to remove the inner seal as well.

Once both seals are removed, insert two new ones, ensuring the window raises and lowers without issues.


Updated on 27 May 2026 by ScegliAuto


Related tutorials

Honda Civic (2006-2012 / MK 8) In this guide, discover how to remove and replace the front window regulator motor on the eighth generation Honda Civic by following these simple ste…
Honda Civic (1995-2001 / MK 6) Before you can start, open the door of your Honda Civic. Begin by inserting a thin but sturdy tool into the gap between the window winder handle and …
Honda Civic (2006-2012 / MK 8) In this tutorial, you can see how to reset the automatic window opening in the Honda Civic, a very simple and quick operation, to be done for example…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos