Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Air Filter on the Honda CR-V

Model: Honda CR-V MK 5 - Years: 2017, 2018, 2019, 2020, 2021, 2022
Part: Air filter

See other generations:
Video tutorial

The air filter is one of the most important components in the engine bay as it allows the engine to 'breathe' optimally and avoid potential issues. If you need to change it but don't know how, follow these simple steps.

Open the front bonnet and lift it fully to the safety position. Stand on the driver's side and proceed to unscrew the four screws holding the large component directly in front of you. To make the job easier, you can also use a battery-powered screwdriver.

Once removed, the air filter is located just below it. Lift it out and replace it with the new model. Refit the four screws you removed earlier and close the bonnet.


Updated on 1 June 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Honda CR-V
How to Replace the Air Filter on a Honda CR-V
Honda CR-V (2007-2012 / MK 3) Replacing the air filter on Honda CR-V models produced from 2007 to 2012 is a very simple maintenance task that can be done independently in a few st…
Replacing the Air Filter on the Honda CR-V L4 2.4L
Replacing the Air Filter on the Honda CR-V L4 2.4L
Honda CR-V (2007-2012 / MK 3) In this video tutorial, you will learn how to remove and replace the engine air filter on the Honda CR-V L4 2.4L third generation in simple steps. Fi…
How to replace the engine air filter of the Honda CR V
How to replace the engine air filter of the Honda CR V
Honda CR-V (2017-2022 / MK 5) In the following guide, we will help you complete the replacement of the engine air filter in your Honda CR V. Before starting the actual procedure, …

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos