Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Honda CR-V

Model: Honda CR-V MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Air filter

See other generations:
Video tutorial

Replacing the air filter on Honda CR-V models produced from 2007 to 2012 is a very simple maintenance task that can be done independently in a few steps. Start by removing the cover where the air filter is located; to do this, you will need to remove all the screws holding it in place using a combination spanner.

After removing the screws, slightly lift the cover and take out the old air filter, clean the filter housing thoroughly, and insert the new one. Complete the job by reattaching the cover and securing it with the screws. The air filter can be purchased online for approximately £15.00.


Updated on 31 July 2026 by ScegliAuto


Related tutorials

Replacing the Air Filter on the Honda CR-V L4 2.4L
Replacing the Air Filter on the Honda CR-V L4 2.4L
Honda CR-V (2007-2012 / MK 3) In this video tutorial, you will learn how to remove and replace the engine air filter on the Honda CR-V L4 2.4L third generation in simple steps. Fi…
How to replace the engine air filter of the Honda CR V
How to replace the engine air filter of the Honda CR V
Honda CR-V (2017-2022 / MK 5) In the following guide, we will help you complete the replacement of the engine air filter in your Honda CR V. Before starting the actual procedure, …
How to Replace the Air Filter on a 2023 Honda CR-V
How to Replace the Air Filter on a 2023 Honda CR-V
Honda CR-V (2023-2026 / MK 6, RS) The procedure to replace the engine air filter on your 2023 Honda CR-V is identical to that used in many other car models, even from different brands…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos