Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on the Honda CR-V

Model: Honda CR-V MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Tire pressure warning light

See other generations:
Video tutorial

If you have just replaced the tyres on your 2011 Honda CR-V and want to eliminate the warning light from the onboard computer, simply follow the instructions in this mini guide to do everything without any issues. First, get inside the vehicle and ensure all doors are closed properly.

Next, turn on the ignition. Locate and hold down the "i" button (located at the lower right side of the steering wheel) for four seconds.

At this point, scroll through the new menu until you see the tyre icon (with an exclamation mark in the centre). Finally, press and hold the "Sel/Reset" button, and a few moments later, you will be done.


Updated on 24 June 2026 by ScegliAuto


Related tutorials

How to Reset the TPMS Light on a Honda CR-V
How to Reset the TPMS Light on a Honda CR-V
Honda CR-V (2012-2017 / MK 4) When the TPMS light illuminates on a Honda CR-V, it indicates that tyre pressure needs adjusting. To adjust the tyre pressure, follow the instruction…
How to Reset the TPMS Light on a Honda CR-V
How to Reset the TPMS Light on a Honda CR-V
Honda CR-V (2017-2022 / MK 5) To reset the TPMS light on a Honda CR-V, use the central touchscreen. Turn on the instrument panel, then tap the "Settings" icon on the display to ac…
How to Reset the TPMS Light on a Honda CR-V
How to Reset the TPMS Light on a Honda CR-V
Honda CR-V (2012-2017 / MK 4) To reset the TPMS light on a Honda CR-V, get in the vehicle and turn on the instrument panel without starting the engine. Press the "MENU" button on …

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos