Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Shift Knob on a Honda Fit?

Model: Honda Fit GR3, GS1, GR9, GR8, GR7, GR6, GR5, GR1, GR4, GR2 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Shift knob

See other generations:
Video tutorial

To replace the shift knob on a Honda Fit, first remove the plastic cover located at the back of the knob to access the underlying components. You will find a screw that needs to be removed to completely take off the knob so it can be replaced with a new part.

After the replacement, install the new knob and secure it with the appropriate screw. This way, you can ensure that the installed part is properly secured and does not cause any issues while driving.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

How to Replace the Shift Knob on a Honda Fit?
How to Replace the Shift Knob on a Honda Fit?
Honda Fit (2013-2019 / GK3, GK4, GP6, GK6, GP5, GK7, GK5, GH7) To replace the shift knob on a Honda Fit, lower the leather cover at the base of the lever. Once this is done, grasp the knob and turn it countercloc…
Where is the fuse box located in the cabin of the Honda Fit?
Where is the fuse box located in the cabin of the Honda Fit?
Honda Fit (2001-2007 / GD, GE) To easily find the fuse box located inside the cabin of your first-generation Honda Fit, you just need to carefully read the following guide and foll…
How to Remove the Door Panel on a Honda Fit?
How to Remove the Door Panel on a Honda Fit?
Honda Fit (2007-2012 / GE) The procedure outlined is useful for removing the door panel on both Honda Fit and Honda Jazz vehicles. Take a screwdriver and remove the single scre…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos