Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Honda Fit?

Model: Honda Fit GE - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Door trim panel

See other generations:
Video tutorial

The procedure outlined is useful for removing the door panel on both Honda Fit and Honda Jazz vehicles. Take a screwdriver and remove the single screw that secures the inner handle, which you then need to detach and pull out. Do the same with the plastic piece where the switch panel is installed to access its connectors and disconnect them.

Also, remove the newly exposed screws. Now the panel is free, and you just need to detach it from the door by prying with a screwdriver at the indicated point in the video.

You can now replace it with a new one.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

How to Open a Stuck Trunk Lid on a Honda Fit?
How to Open a Stuck Trunk Lid on a Honda Fit?
Honda Fit (2007-2012 / GE) On the Honda Fit, the trunk lid may get stuck due to a malfunction in the lock actuator or the release button. In this case, you can still perform an…
How do you reset the tire pressure warning light on the Honda Fit?
How do you reset the tire pressure warning light on the Honda Fit?
Honda Fit (2013-2019 / GK3, GK4, GP6, GK6, GP5, GK7, GK5, GH7) To reset the tire pressure warning light on the Honda Fit, you need to inflate the tires until they reach the recommended pressure value: this value …
How to Replace the Cabin Air Filter in the Honda Fit?
How to Replace the Cabin Air Filter in the Honda Fit?
Honda Fit (2007-2012 / GE) The box containing the cabin air filter in the Honda Fit is located behind the glove compartment. To change the filter, first open the glove compartm…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos