Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open a Stuck Trunk Lid on a Honda Fit?

Model: Honda Fit GE - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Checks and maintenance

See other generations:
Video tutorial

On the Honda Fit, the trunk lid may get stuck due to a malfunction in the lock actuator or the release button. In this case, you can still perform an emergency opening by following the simple procedure shown in this tutorial.

First, open the rear doors, then lower the rear seat by operating the corresponding lever. Next, go inside the trunk, locate the small access panel indicated, and remove it. At this point, you can unlock the latch using a small screwdriver.


Updated on 13 September 2026 by ScegliAuto


Related tutorials

How to Replace the Trunk Light of a Honda Fit with a Much Brighter One
How to Replace the Trunk Light of a Honda Fit with a Much Brighter One
Honda Fit (2020-2026 / GR3, GS1, GR9, GR8, GR7, GR6, GR5, GR1, GR4, GR2) Having a well-lit trunk is essential for clearly performing all loading and unloading operations. Here’s how to replace the standard bulb in the trun…
How to Replace the Tail Lights on the Honda Fit?
How to Replace the Tail Lights on the Honda Fit?
Honda Fit (2020-2026 / GR3, GS1, GR9, GR8, GR7, GR6, GR5, GR1, GR4, GR2) Replacing the tail lights on the Honda Fit is done through a specific access point from inside the trunk. Therefore, there is no need to disassemble …
How to Replace the Cabin Air Filter in the Honda Fit?
How to Replace the Cabin Air Filter in the Honda Fit?
Honda Fit (2007-2012 / GE) The box containing the cabin air filter in the Honda Fit is located behind the glove compartment. To change the filter, first open the glove compartm…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos