Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Windscreen on the Honda SH 300 (2018)

Model: Honda Honda Various

As shown in the video, you will replace a shorter windscreen with a taller one on the Honda SH 300. The operation is very simple and will take only a few minutes. First, unscrew the three screws of the outer panel and gently remove it to avoid scratching. You only need a screwdriver, and at this point, unscrew the 4 screws holding the old windscreen to be replaced. Position the new windscreen in its housing, ensuring the holes align, and start screwing in the 4 screws. Finally, reattach the outer panel by screwing in the three screws.

Updated on 24 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Maintenance Light on the Honda SH 300
How to Reset the Maintenance Light on the Honda SH 300
Honda Honda Various It may happen that after having the service done on your Honda SH 300, the mechanic forgot to reset the maintenance light. In this case, you can perf…
How to remove the front shield of the Honda SH 300
How to remove the front shield of the Honda SH 300
Honda Honda Various If you need to remove the front shield of the fairing on this scooter model for maintenance, the description and video provided here summarise all th…
How to Replace the Key Battery on a Honda Vehicle
How to Replace the Key Battery on a Honda Vehicle
Honda Honda Various Replacing the battery in a Honda vehicle remote is the same for all other vehicles produced by the manufacturer. This operation is very simple to per…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos