Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front shield of the Honda SH 300

Model: Honda Honda Various
Part: Body

If you need to remove the front shield of the fairing on this scooter model for maintenance, the description and video provided here summarise all the steps and necessary information to proceed with the removal. First, secure the vehicle on its stand. Then locate the profile of the front shield, which is fixed to the frame with plastic clips. To remove the panel, gently lift it with your hands, pulling it towards you. This way, the panel can be removed, and if necessary, replaced.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Windscreen on the Honda SH 300 (2018)
How to Remove the Windscreen on the Honda SH 300 (2018)
Honda Honda Various As shown in the video, you will replace a shorter windscreen with a taller one on the Honda SH 300. The operation is very simple and will take only a…
How to Reset the Maintenance Light on the Honda SH 300
How to Reset the Maintenance Light on the Honda SH 300
Honda Honda Various It may happen that after having the service done on your Honda SH 300, the mechanic forgot to reset the maintenance light. In this case, you can perf…
Replacing Front Bulb on Honda Silver Wing
Replacing Front Bulb on Honda Silver Wing
Honda Honda Various If you want to know how to replace the front headlight bulb on a Honda Silver Wing, not only will we tell you, but we have good news! To do this, you…

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos