Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a 2019 Honda

Model: Honda Fit GK3, GK4, GP6, GK6, GP5, GK7, GK5, GH7 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

To reset the oil light on a 2019 Honda Fit, simply enter the vehicle and turn the ignition on to make it easier to rotate the steering wheel to the right. Then, turn off the ignition.

Next, press and hold the button located on the instrument panel to the right. Keep holding the button until the ignition turns on and starts flashing.

When the lights begin to flash, release the button and then press it again for about ten seconds. Once the display stops flashing, turn off the ignition.

Repeat the process if necessary.


Updated on 14 August 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Honda Fit
How to Reset the Service Light on the Honda Fit
Honda Fit (2013-2019 / GK3, GK4, GP6, GK6, GP5, GK7, GK5, GH7) Today, you will learn how to reset the oil light after performing an oil change on a 2017 Honda Fit. Press the button located under the odometer to d…
How to Reset the Service Light on a Honda Fit
How to Reset the Service Light on a Honda Fit
Honda Fit (2013-2019 / GK3, GK4, GP6, GK6, GP5, GK7, GK5, GH7) In this tutorial, you will learn how to reset the service light, which indicates the remaining life of the engine oil, on a Honda Fit produced from 2…
How to Manually Reset the Oil Light on a 2019 Honda Fit
How to Manually Reset the Oil Light on a 2019 Honda Fit
Honda Fit (2013-2019 / GK3, GK4, GP6, GK6, GP5, GK7, GK5, GH7) In this guide for Honda Fit owners from 2019, you will learn how to correctly and manually reset the engine oil light. First, insert the key and turn…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos