Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Honda Fit

Model: Honda Fit GK3, GK4, GP6, GK6, GP5, GK7, GK5, GH7 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Warning light – error code

See other generations:
Video tutorial

In this tutorial, you will learn how to reset the service light, which indicates the remaining life of the engine oil, on a Honda Fit produced from 2013 to 2019. First, turn on the vehicle's ignition without starting the engine. Next, press the button on the right side of the speedometer until you see the screen displaying the remaining oil life percentage.

At this point, press and hold the same button on the speedometer until the message starts to blink, then release the button and press and hold it again until the reset is complete.


Updated on 10 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Honda Fit
How to Reset the Service Light on the Honda Fit
Honda Fit (2013-2019 / GK3, GK4, GP6, GK6, GP5, GK7, GK5, GH7) Today, you will learn how to reset the oil light after performing an oil change on a 2017 Honda Fit. Press the button located under the odometer to d…
How to Reset the Service Light on a Honda Fit?
How to Reset the Service Light on a Honda Fit?
Honda Fit (2013-2019 / GK3, GK4, GP6, GK6, GP5, GK7, GK5, GH7) To reset the Service light on a Honda Fit, turn on the ignition by inserting the key into the ignition switch. Once the dashboard lights up, repeated…
How to Reset the Service Light in a Honda Fit
How to Reset the Service Light in a Honda Fit
Honda Fit (2007-2012 / GE) To reset the service light in a Honda Fit, turn on the instrument panel without starting the engine and use the SEL/RESET button to display the maint…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos