Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Tyre Pressure Warning Light on a Honda Insight

Model: Honda Insight ZE4 - Years 2019-2026
Part:

Today, you will see how to reset the tyre pressure warning light on a Honda Insight, registered in 2019. The pressure warning light activates if there is incorrect pressure in one or more tyres, during tyre rotation, or when replacing one or more tyres. Once you are sure of the correct pressure in all four tyres, you can reset the warning light. Start by turning on the ignition and then move to the multimedia display on the dashboard. Here, select the "settings" option, then the "vehicle" option, and finally click on "TPMS calibration" followed by "calibrate".

Updated on 12 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre warning light in the Honda Insight?
How to reset the tyre warning light in the Honda Insight?
Honda Insight (2019-2026 / ZE4) As we can see in this tutorial, resetting the tyre warning light in the Honda Insight is an extremely simple and quick operation. Before proceeding, …
How do you reset the tire pressure light on the Honda Insight?
How do you reset the tire pressure light on the Honda Insight?
Honda Insight (2009-2014 / ZE3, ZE2) In order to reset the tire pressure warning light on the Honda Insight, you need to inflate the tires to the recommended pressure value: this value i…
How to reset the service light on the Honda Insight
How to reset the service light on the Honda Insight
Honda Insight (2009-2014 / ZE3, ZE2) To reset the service light on the Honda Insight, we need to turn on the vehicle without starting the engine, as light resets should always be done wi…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos