Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Tyre Pressure Light on a Honda Civic

Model: Honda Civic FL, FE, MK 11 - Years: 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre pressure light on a Honda Civic, locate the button to the left of the steering wheel that has the same symbol as the light on the instrument cluster. Turn on the ignition and press and hold the button with the tyre symbol until the light flashes twice.

After the light has flashed, on the infotainment system, press the "home" button on the left side of the screen, then press the "settings" tile, followed by "vehicle", then "tpms calibration", and finally "calibrate". Now, drive the vehicle for 30 minutes at speeds between 30 miles/h and 60 miles/h; after 30 minutes, the tyre pressure will be calibrated.


Updated on 8 October 2026 by ScegliAuto


Related tutorials

Honda Civic (2012-2015 / MK 9) In this guide, discover the steps to reset the tyre pressure warning on the Honda Civic. Before resetting the TPMS sensors, ensure that all four tyre…
Honda Civic (2012-2015 / MK 9) Today, discover how to reset the tyre pressure warning on the Honda Civic; before performing the reset, ensure that all four tyres are at the correct…
Honda Civic (2012-2015 / MK 9) Below we will see the instructions that will allow us to reset the tire pressure warning of the Honda Civic; before resetting the TPMS sensors, it is…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

What does the "Code 82" message indicate in the Chevrolet Orlando and how to remove it?

If the "Code 82" message appears on the dashboard of your Chevrolet Orlando, it means that the service interval in miles or time has been reached. Once all scheduled maintenance tasks are completed, you can remove the warning by following the simple procedure shown in this tutorial. First, insert the key and turn on the ignition, then press the "MENU" button located on the left control stalk and navigate to the screen displaying the "Reset" option. At this point, press the "SET/CLR" button at the end of the same stalk and confirm the reset.

Watch the video!


by ScegliAuto

More videos