Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Husaberg Fc 600 - Videoguide

Husaberg Fc 600
How do you replace the stator of the Husaberg FC 600?
In order to replace the stator of the Husaberg FC 600 it is necessary to loosen the screws that fix the casing positioned on the right side of the bike, in the …read all…
Posted on 24 July 2022 by ScegliAuto
Husaberg Fc 600
Valve setting on Husaberg FC 600
On Husaberg Fc 600 the setting of the valves is recommended every 15 hours of use. Before doing this, know that you will have to remove the seat, the tank, the …read all…
Posted on 28 February 2024 by ScegliAuto
Husaberg Fc 600
Adjusting the valves in the Husaberg FC 600
Before proceeding with the valve adjustment of the Husaberg FC 600, it is advisable (as always, whenever you want to carry out a maintenance operation on any …read all…
Posted on 25 January 2024 by ScegliAuto
Checks and maintenance (1) Valve (2)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos