Do it yourself
Frequently asked questions about cars and motorcycles

Husaberg Fe 400 - Videoguide

Husaberg Fe 400
How do you replace the engine oil of the Husaberg FE 400?

In order to replace the motor oil of the Husaberg FE 400, you need to loosen the drain plug of the oil pan located at the bottom of the vehicle: once this has …read all…
Posted on 1 May 2024 by ScegliAuto
Husaberg Fe 400
How do you disassemble the engine of a Husaberg FE 400?

The procedure for disassembling the Husaberg FE 400 engine involves first removing it from its housing, unscrewing the screws that attach it to the appropriate …read all…
Posted on 5 June 2023 by ScegliAuto
Husaberg Fe 400
How do you disassemble the engine of the Husaberg FE 400?

The engine disassembly operation of the Husaberg FE 400 is carried out first of all by extracting it from its housing, unscrewing the screws that fix it to the …read all…
Posted on 30 December 2022 by ScegliAuto
Husaberg Fe 400
How do you disassemble the Husaberg FE 400 engine?

To be able to disassemble the Husaberg FE 400 engine, first of all you need to extract it from its housing, unscrewing the screws that secure it to the special …read all…
Posted on 3 October 2022 by ScegliAuto
Engine (3) Engine oil (1)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos