Do it yourself
Frequently asked questions about cars and motorcycles
In order to replace the motor oil of the Husaberg FE 400, you need to loosen the drain plug of the oil pan located at the bottom of the vehicle: once this has been loosened, you can proceed by collecting all the used oil in a properly positioned container. Once the oil has completely drained, you can also remove the corresponding filter located at the bottom of the vehicle; at this point, you can insert the new filter and top up from the vent on the right side of the bike.

Posted on 1 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Fe 400 In order to replace the exhaust pipe of the Husaberg FE 400, you need to loosen the screws that fix the exhaust terminal to its housing: this will be…
Fe 400 To remove the engine from a Husaberg FE 400, first extract it from its housing by unscrewing the bolts that secure it to the supports and disconnecti…
Fe 400 In order to remove the engine of the Husaberg FE 400, you need to loosen the screws that fix the engine block to its housing: to do this, you will fi…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos