Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Model: Husaberg Et 300
Part: Air filter

We disassemble the engine air filter on a Husaberg Et 300. Let's see in this video guide how to proceed with the replacement. We place the bike on a central stand, remove the saddle from the bike; we detach the left side fairing (as in the video). We uncover the cap and remove the air filter. Let's place a new one if damaged or reposition the same after cleaning it (use an air compressor or wash it). Finally, we close the air filter holder, reposition the left side cover and reassemble the saddle.


Posted on 14 November 2023 by ScegliAuto



Husaberg TE 300 engine oil and air filter replacement
Te 300 In today's video we will see the steps to be able to replace the engine oil and air filter of a Husaberg TE 300, performing the regular routine maint
How to replace the engine oil and the oil filter of the Husaberg Te 300
Te 300 In this guide, let's find out together the instructions on how to carry out the routine maintenance coupon, replacing the engine oil and the oil filt
How do you replace the fairing of the Husaberg TE 300?
Te 300 To complete the replacement of the fairing of the Husaberg TE 300, you will need to loosen the screws that secure all the panels that make it up: you

How to change the engine oil of a Honda CRF 300?

To replace the motor oil of a Honda CRF 300, start by placing the motorcycle on a flat and stable surface. Remove the oil drain plug, located on the bottom of the engine, using a suitable wrench. Allow the old oil to completely drain into an appropriate container. Then, tighten the oil drain plug, making sure it is securely sealed. Proceed to pour the new oil into the engine through the fill cap, which is usually located on the top of the engine. Use a funnel to facilitate the operation and make sure to add the correct amount of oil, as indicated in the owner's manual. After completing the filling, start the engine for a few minutes to allow the oil to circulate and check for any leaks. Finally, turn off the engine and check the oil level, adding more oil if necessary.

Watch the video!


by ScegliAuto

More videos