Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Husaberg
    3. : Fe 550 : How do you replace the clutch housing of the Husaberg FE 550?

Model: Husaberg Fe 550
Part: Clutch
How do you replace the clutch housing of the Husaberg FE 550?

To replace the clutch housing of the Husaberg FE 550, you need to loosen the bolts that hold it to its housing. It can be found on the left side of the bike, in the center at the bottom, near the crank. To remove the housing, you will need to loosen all the bolts holding it in place and detach it from its seat. This will allow you to work on the old housing, repairing any damaged parts or installing a new one directly. The piece will then need to be fixed to its housing with the appropriate screws.


Posted on 3 May 2023 by ScegliAuto

How to replace the rear brake pads of Benelli TRK 502?

In order to replace the rear brake pads of the Benelli TRK 502 it is necessary to loosen the bolts that fix the caliper, so that it can be detached from the relative disc of the rear wheel. Once the caliper has been removed, it will be possible to go and extract the old pads from the inside of the caliper so that the new spare parts can be inserted. Once the new pads have been inserted inside the caliper, it will be necessary to position the latter on its disc, fixing it with the bolts that were previously removed.

Watch the video!


by ScegliAuto

More videos