Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Husaberg Fe 550
Part: Engine

To remove the engine from the Husaberg FE 550, you need to loosen all the screws that secure the engine block to the respective supports on the frame, located below the seat: once the securing screws are loosened, proceed by disconnecting all connectors related to the sensors on the engine and also disconnecting the intake and exhaust pipes. Once the engine block is freed, it can be extracted from its housing; you can then insert the new one, securing and connecting it properly.

Updated on 7 September 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How do you replace the exhaust on the Husaberg FE 550?
How do you replace the exhaust on the Husaberg FE 550?
Fe 550 The replacement of the exhaust pipe of the Husaberg FE 550 can be carried out by loosening the screws that fix it to its housing on the rear fender, …
How to replace the clutch cover of the Husaberg FE 550?
How to replace the clutch cover of the Husaberg FE 550?
Fe 550 To replace the clutch cover of the Husaberg FE 550, you need to loosen the bolts that secure it to its housing: this will be located on the left side…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos