Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Service the Husqvarna TE 250i

Model: Husqvarna Te 250
Part: Engine oil

Video tutorial

Today's information will show you how to carry out the routine maintenance service, replacing the engine oil and oil filter on the Husqvarna TE 250i enduro bike. First, place the bike on a stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the screws of the oil filter cover to remove and replace the cartridge with a new one, as shown in the video.

At this point, unscrew the filler cap and pour in the new oil, ensuring the correct quantity.


Updated on 28 October 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on the Husqvarna TE 250?
How to Change the Engine Oil on the Husqvarna TE 250?
Te 250 You can change the engine oil on the Husqvarna TE 250 by loosening the drain plug located at the central lower part of the vehicle: once this plug is…
How to Change the Transmission Oil on a Husqvarna TE 250
How to Change the Transmission Oil on a Husqvarna TE 250
Te 250 Discover how to change the transmission oil on the Husqvarna TE 250 enduro bike in simple and quick steps. First, place your bike on a stand and star…
How to Replace the Clutch on a Husqvarna TE 250
How to Replace the Clutch on a Husqvarna TE 250
Te 250 To replace the clutch on a Husqvarna TE 250, loosen the screws securing the panel on the side of the bike. This will allow you to detach it and acces…

How to Replace the Air Filter on a Honda SH 300i Scooter?

In this tutorial, you will see how to replace the air filter on a Honda SH 300i scooter, a very simple and quick operation. Before proceeding, ensure the engine is completely cold for safety. Start by unscrewing both the 6 screws around the perimeter of the airbox and the 3 bolts of the circular cover, then remove the cover and unscrew the additional screw that has just been freed. Next, separate the box, remove the old filter, and clean the housing of any dirt residue. Finally, follow the reverse procedure to install the replacement.

Watch the video!


by ScegliAuto

More videos