Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Husqvarna Te 250
Part: Clutch

In order to replace the clutch of the Husqvarna TE 250, you need to loosen the screws that secure the panel on the side of the motorcycle: this way you will be able to detach it and locate the clutch discs that need to be removed from their housing by unscrewing the screws that hold them. Once the old clutch has been removed, you can insert the new clutch discs into their housing, securing them properly. After installation, you can close everything with the cover to check that everything is working properly.

Posted on 30 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust of a Husqvarna TE 250
How to Replace the Exhaust of a Husqvarna TE 250
Te 250 You can replace the exhaust end of the Husqvarna TE 250 by loosening the screws that secure the side cover panel of the rear mudguard. Once detached,…
How to Change the Engine Oil on the Husqvarna TE 250?
How to Change the Engine Oil on the Husqvarna TE 250?
Te 250 You can change the engine oil on the Husqvarna TE 250 by loosening the drain plug located at the central lower part of the vehicle: once this plug is…
How do you replace the cylinder of the Husqvarna TE 250?
How do you replace the cylinder of the Husqvarna TE 250?
Te 250 In order to remove the cylinder of the Husqvarna TE 250, you first need to remove the components that prevent access to the top of the engine block: …

How to Replace the Tyres on the Husaberg FE 450

In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos