Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in the Husqvarna Vitpilen 401?

Model: Husqvarna Vitpilen 401
Part: Engine oil

Video tutorial

In this tutorial, see how to change the engine oil in the Husqvarna Vitpilen 401, a very simple and quick operation. First, ensure the engine is cool enough for safe operation, then position a container underneath the bike, locate the bolts of the two drainage holes and unscrew them using both an 18mm and a 13mm socket wrench.

Allow all the oil in the system to drain out, remove the secondary filters and clean them of any dirt residue. At this point, simply open the cap of the main filter with an 8mm wrench, insert the replacement, reassemble everything and add the necessary amount of oil through the designated hole.


Posted on 7 March 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a Husqvarna Vitpilen 401?
How to Change the Engine Oil in a Husqvarna Vitpilen 401?
Vitpilen 401 In this tutorial, you will see how to change the engine oil in a Husqvarna Vitpilen 401, a very simple and quick operation. First, ensure that the en…
How to Change the Engine Oil in a Husqvarna Vitpilen 401
How to Change the Engine Oil in a Husqvarna Vitpilen 401
Vitpilen 401 In this tutorial, you will see how to change the engine oil in a Husqvarna Vitpilen 401, a very simple and quick operation. First, ensure that the en…
How to Change the Engine Oil in a Husqvarna Vitpilen 401?
How to Change the Engine Oil in a Husqvarna Vitpilen 401?
Vitpilen 401 In this tutorial, you will see how to change the engine oil in a Husqvarna Vitpilen 401, an extremely simple and quick operation. First, ensure that …

How to Replace the Air Filter on a Honda SH 300i Scooter?

In this tutorial, you will see how to replace the air filter on a Honda SH 300i scooter, a very simple and quick operation. Before proceeding, ensure the engine is completely cold for safety. Start by unscrewing both the 6 screws around the perimeter of the airbox and the 3 bolts of the circular cover, then remove the cover and unscrew the additional screw that has just been freed. Next, separate the box, remove the old filter, and clean the housing of any dirt residue. Finally, follow the reverse procedure to install the replacement.

Watch the video!


by ScegliAuto

More videos