Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Husqvarna Vitpilen 401?

Model: Husqvarna Vitpilen 401
Part: Engine oil

Video tutorial

In this tutorial, you will see how to change the engine oil in a Husqvarna Vitpilen 401, a very simple and quick operation. First, ensure that the engine is cool enough to operate safely, then locate the bolts of the two drain holes and unscrew them using both an 18mm and a 13mm socket.

Next, remove the secondary filter, clean it of any dirt, and open the main filter cap with an 8mm socket. At this point, simply insert the replacement, reassemble everything, and pour in the required amount of oil through the designated upper hole.


Posted on 24 October 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a Husqvarna Vitpilen 401?
How to Change the Engine Oil in a Husqvarna Vitpilen 401?
Vitpilen 401 .. In this tutorial, you will see how to change the engine oil in a Husqvarna Vitpilen 401, an extremely simple and quick operation. First,.. …
How to Change the Engine Oil in a Husqvarna Vitpilen 401
How to Change the Engine Oil in a Husqvarna Vitpilen 401
Vitpilen 401 .. In this tutorial, you will see how to change the engine oil in a Husqvarna Vitpilen 401, a very simple and quick operation. First, ensure.. …
How to Change the Engine Oil in the Husqvarna Vitpilen 401?
How to Change the Engine Oil in the Husqvarna Vitpilen 401?
Vitpilen 401 In this tutorial, see how to change the engine oil in the Husqvarna Vitpilen 401, a very simple and quick operation. First, ensure the engine is cool…

How to Replace the Brake Pads on the Piaggio Vespa Px 125?

Start by removing the wheel and then take off the plastic cover on the brake caliper and detach the ring that secures the pin to which the pads are attached. Pull out the pin using pliers and remove the anti-vibration shim. After removing the worn brake pads, you need to return the pistons to their original position, which can be done using a flat screwdriver. Now you can insert the new pads and reposition the various elements removed earlier: the shim, the pin, the ring, the cover, and the wheel.

Watch the video!


by ScegliAuto

More videos