Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Husqvarna
    3. : Husqvarna 401

How to Reset the Service Light on a Husqvarna 401

Model: Husqvarna Husqvarna 401
Part: Service warning light

Video tutorial

Today, learn how to reset the service light related to the service interval on the Husqvarna 401. To reset the light, press the button on the left side of the speedometer to access the settings menu; by pressing the arrow button, select the spanner symbol and hold the button to update the mileage for the next service.

This operation should only be performed after completing the oil change and other maintenance tasks; otherwise, you could cause damage not only to the engine but also to the control unit.


Posted on 25 March 2026 by ScegliAuto


Related tutorials

How to Reset the Service on a Husqvarna Svartpilen 401?
How to Reset the Service on a Husqvarna Svartpilen 401?
Svartpilen 401 In this tutorial, you will see how to reset the service on the Husqvarna Svartpilen 401, a very simple and quick operation to perform only after comp…
How to Reset the Service Light on a Husqvarna Svartpilen 401
How to Reset the Service Light on a Husqvarna Svartpilen 401
Svartpilen 401 In this tutorial, you will see how to reset the service light on a Husqvarna Svartpilen 401, a very simple and quick operation, to be carried out onl…
How to Replace the Air Filter on the Husqvarna Svartpilen 401
How to Replace the Air Filter on the Husqvarna Svartpilen 401
Svartpilen 401 These brief and simple steps will show you how to remove and replace the engine air filter on the Husqvarna Svartpilen 401, as well as the Vitpilen 4…

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos