Do it yourself
Frequently asked questions about cars and motorcycles
These brief and simple steps will show you how to remove and replace the engine air filter on the Husqvarna Svartpilen 401, as well as the Vitpilen 401. First, place your motorcycle on its stand and begin removing the rider's seat; then unscrew the screws of the air filter cover located on the sides, as shown in the video. At this point, remove the air filter cartridge and replace it with a new one; insert it in the correct orientation and finally reassemble the filter box cover, remounting the rider's and passenger's seats!

Updated on 23 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Svartpilen 401 To replace the air filter on a Husqvarna Svartpilen 401, insert the ignition key into the lock located on the left side of the bike to release the se…
Svartpilen 401 In this tutorial, see how to change the engine oil in a Husqvarna Svartpilen 401, a very simple and quick operation. First, ensure the engine is comp…
Svartpilen 401 In this tutorial, you will see how to reset the service on the Husqvarna Svartpilen 401, a very simple and quick operation to perform only after comp…

How to Replace the Engine Oil in the KTM Duke 390?

As you can see in this tutorial, replacing the engine oil in the KTM Duke 390 is a very simple and quick task. Before proceeding, wait until the engine is completely cold to work safely. Start by placing a container underneath the bike, then locate the drain plug on the lower left side and unscrew it with a socket wrench. Once all the oil contained in the engine has drained out, open the filter housing cap, replace the filter, and reassemble everything. Finally, insert new oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos