Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the chain of the Husqvarna Svartpilen 401, you will need to break the piece using a chain breaker: this way, it will be possible to split it at a point so that it can be removed from the corresponding sprockets. At this point, you will be able to position the new chain around the corresponding sprockets: then you will need to use the appropriate pin to ensure that the chain is closed. At this point, you should make sure that it is at the correct tension, and then you will need to start the engine to check that everything is working.

Posted on 17 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the Husqvarna Svartpilen 401?
How do you replace the exhaust pipe of the Husqvarna Svartpilen 401?
Svartpilen 401 In order to replace the exhaust of the Husqvarna Svartpilen 401, you need to loosen the screws that fix the exhaust terminal to the respective suppor…
How to Reset the Service on a Husqvarna Svartpilen 401?
How to Reset the Service on a Husqvarna Svartpilen 401?
Svartpilen 401 In this tutorial, you will see how to reset the service on the Husqvarna Svartpilen 401, a very simple and quick operation to perform only after comp…
How to Reset the Service Light on a Husqvarna Svartpilen 401
How to Reset the Service Light on a Husqvarna Svartpilen 401
Svartpilen 401 In this tutorial, you will see how to reset the service light on a Husqvarna Svartpilen 401, a very simple and quick operation, to be carried out onl…

How to Change the Engine Oil in an Aprilia RS 660?

In this tutorial, we will see how to change the engine oil in an Aprilia RS 660, a very simple operation to be done every 12 months. First, ensure that the engine is completely cold, then remove the screws securing the lower fairing and take it off. Next, place a container underneath the bike, unscrew the drain bolt with an 8 mm hex key, and let all the oil in the system drain out. At this point, you can replace the filter, reassemble everything, and add new oil through the designated fill hole.

Watch the video!


by ScegliAuto

More videos