Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Husqvarna Sm 125
Part: Bearing

In this guide, we will discover the instructions that will allow us to disassemble and replace the wheel bearing, whether front or rear, on the Husqvarna SM 125 motorcycle. First, place the bike on a stand and begin to disassemble and remove the wheel; using a lever, remove the dust cover that protects the bearing, then use a puller to extract the bearing from its seat, as shown in the video. At this point, clean the inside before installing the new bearing, heating the seat to facilitate insertion; finally, refit the new dust cover.

Posted on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Discs on a Husqvarna SM 125?
How to Replace the Discs on a Husqvarna SM 125?
Sm 125 To replace the discs on a Husqvarna SM 125, start by removing the front wheel by unscrewing the bolts at the bottom of the forks and the nut holding …
How to Replace the Transmission on a Husqvarna SM 125
Sm 125 To replace the transmission on a Husqvarna SM 125, first remove the old sprocket and install a new one, following the steps shown in the video. Next,…
How to Service the Husqvarna SM 125
How to Service the Husqvarna SM 125
Sm 125 In this video tutorial, you will learn how to replace the engine oil while performing the regular maintenance service on a Husqvarna SM 125 enduro bi…

How do you replace the headlight bulb of the Sym Citycom 300?

In order to replace the headlight bulb of the Sym Citycom 300, you need to loosen the screws that secure the panels located at the front of the motorcycle fairing: once the fastening screws of these panels have been loosened, you can unscrew those on the inside of the front fairing, so that the latter can be removed from its seat. Now it will be possible to proceed by unscrewing the screws that secure the corresponding headlight, disconnecting its connector and removing the bulb inside; in this way you can reinstall the removed panels.

Watch the video!


by ScegliAuto

More videos