Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Before starting the replacement of the front brake pads on your Husqvarna SM 125, ensure the motorcycle is stable and secure on its stand to protect the operator's safety (this precaution should be taken whenever performing maintenance on a motorcycle). Unscrew the bolts securing the caliper in place. Remove the caliper from its position, and after removing the pins, take out the two pads. Insert the new pads, secure them with the pins, space them to accommodate the disc, and refit the caliper in its place.

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Discs on a Husqvarna SM 125?
How to Replace the Discs on a Husqvarna SM 125?
Sm 125 To replace the discs on a Husqvarna SM 125, start by removing the front wheel by unscrewing the bolts at the bottom of the forks and the nut holding …
How to Replace the Transmission on a Husqvarna SM 125
Sm 125 To replace the transmission on a Husqvarna SM 125, first remove the old sprocket and install a new one, following the steps shown in the video. Next,…
How to Replace the Piston on a Husqvarna SM 125?
How to Replace the Piston on a Husqvarna SM 125?
Sm 125 To replace the piston on the Husqvarna SM 125, first open the coolant drain cap and collect it in a container. Next, remove the spark plug and loosen…

How to Service the Beta RR 350

This video will illustrate the steps to perform the routine maintenance service, replacing the engine oil and oil filter on the Beta RR 350 enduro bike. First, place the bike on a stand and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter (replacing it with a new one if too dirty). Finally, top up with new oil, of the correct type for your engine, filling to the maximum level!

Watch the video!


by ScegliAuto

More videos