Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pads and Oil on the Husqvarna SM 125?

Model: Husqvarna Sm 125
Part: Brake pads

Video tutorial

To replace the brake pads on the Husqvarna SM 125, loosen the bolts located on the brake caliper near the fork. Once the bolts are removed, you can detach the brake caliper from the disc and remove the pins that hold the pads in place.

Then, the old pads can be removed and replaced with new spare parts. At this point, secure them with the corresponding pins, and the brake caliper can be fixed back onto the disc.

To replace the oil, open the drain plug located at the bottom of the bike. After collecting the used oil in a container, close the drain plug and top up with new oil from the appropriate cap.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

Replacement of Brake Pads on Husqvarna SM 125
Replacement of Brake Pads on Husqvarna SM 125
Sm 125 Before starting the replacement of the front brake pads on your Husqvarna SM 125, ensure the motorcycle is stable and secure on its stand to protect …
How to Service the Husqvarna SM 125
How to Service the Husqvarna SM 125
Sm 125 In this video tutorial, you will learn how to replace the engine oil while performing the regular maintenance service on a Husqvarna SM 125 enduro bi…
How to Replace the Discs on a Husqvarna SM 125?
How to Replace the Discs on a Husqvarna SM 125?
Sm 125 To replace the discs on a Husqvarna SM 125, start by removing the front wheel by unscrewing the bolts at the bottom of the forks and the nut holding …

How to Replace the Front Shock Absorber Seals on a Derbi Senda?

To replace the front shock absorber seals on a Derbi Senda, completely remove the shock absorber by undoing the bolts that secure it to the steering and then those that attach it to the corresponding front wheel. Once the shock absorber is fully removed, disconnect the piston from the hollow cylinder at the bottom of the shock absorber. Now the seal will be accessible, and you can remove it from its housing using a lever tool; finally, insert the new seals and reassemble the shock absorber.

Watch the video!


by ScegliAuto

More videos