Do it yourself
Frequently asked questions about cars and motorcycles
In this video tutorial, you will learn how to replace the engine oil while performing the regular maintenance service on a Husqvarna SM 125 enduro bike. First, warm up the engine for a few minutes and unscrew the oil drain bolt located under the engine; allow it to drain into a container for about ten minutes. Before replacing the plug, clean the magnet that holds all the metal debris; then pour the correct type of new engine oil into the crankcase, filling to the level indicated by the manufacturer!

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Sm 125 To replace the transmission on a Husqvarna SM 125, first remove the old sprocket and install a new one, following the steps shown in the video. Next,…
Sm 125 Before starting the replacement of the front brake pads on your Husqvarna SM 125, ensure the motorcycle is stable and secure on its stand to protect …
Sm 125 The procedure for disassembling the engine of the Husqvarna SM 125 is carried out by loosening the screws that fix the engine to its housing: once th…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos