Do it yourself
Frequently asked questions about cars and motorcycles
To replace the transmission on a Husqvarna SM 125, first remove the old sprocket and install a new one, following the steps shown in the video. Next, mount the new sprocket on the rear wheel after removing it. To fit the sprocket, position it and insert the appropriate fixing screws. Once the screws are tightened, you can insert the chain, passing it between the sprocket and the sprocket and tensioning it. Finally, insert the pin that secures the wheel to the rear swingarm.

Updated on 8 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Sm 125 To replace the piston on the Husqvarna SM 125, first open the coolant drain cap and collect it in a container. Next, remove the spark plug and loosen…
Sm 125 In this video tutorial, you will learn how to replace the engine oil while performing the regular maintenance service on a Husqvarna SM 125 enduro bi…
Sm 125 The procedure for disassembling the engine of the Husqvarna SM 125 is carried out by loosening the screws that fix the engine to its housing: once th…

How to Replace the Front Tyre on the Sym Wide Evo 125

Below are the main steps that will allow you to remove and replace the front wheel and tyre of the Sym Wide Evo 125 scooter. First, place your scooter on the centre stand and start unscrewing the fixing screws of the front brake caliper to remove it; then unscrew the nuts of the front wheel, as shown in the video. At this point, remove the tyre from the rim, replacing it with the new one; then install the front wheel and reattach the brake caliper, applying the reverse procedure of disassembly!

Watch the video!


by ScegliAuto

More videos