Do it yourself
Frequently asked questions about cars and motorcycles
To replace the piston on the Husqvarna SM 125, first open the coolant drain cap and collect it in a container. Next, remove the spark plug and loosen the hose clips. The next step is to disconnect the radiator hoses and the valve breather hoses: at this point, you can remove the valve mechanism cover and the mechanism itself, as shown in the video. After removing the fixing screws of the head and the corresponding gaskets, you can pull out the pin and take out the piston, replacing it with a new spare part.

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Sm 125 The procedure for disassembling the engine of the Husqvarna SM 125 is carried out by loosening the screws that fix the engine to its housing: once th…
Sm 125 In order to disassemble the engine of the Husqvarna SM 125, you need to loosen the screws that secure the engine block to its housing located in the …
Sm 125 To replace the transmission on a Husqvarna SM 125, first remove the old sprocket and install a new one, following the steps shown in the video. Next,…

How to Dismantle the Engine of the KTM EXC 300

To dismantle the engine of the KTM EXC 300, remove the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is extracted, unscrew the bolts that secure the cylinder at its top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. You can now replace the necessary parts and subsequently reinstall the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos