Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Chain, Sprocket and Gear on a Husqvarna FE 450

Model: Husqvarna Fe 450
Part:

Video tutorial

Let’s discover the steps and instructions that will guide you through the disassembly and replacement of the chain, sprocket, and gear on the Husqvarna FE 450 enduro bike. First, place the bike on a stand and lift the rear wheel off the ground; remove the wheel by unscrewing the central axle nut and disconnecting the drive chain, as shown in the video.

At this point, unscrew the bolts of the sprocket and gear on the wheel, removing the old sprockets and replacing them with new ones; install the new drive chain, adjusting it after fitting the wheel.


Posted on 9 June 2026 by ScegliAuto


Related tutorials

Replacing the Rear Wheel Bearing on the Husqvarna FE 450
Replacing the Rear Wheel Bearing on the Husqvarna FE 450
Fe 450 This guide shows how to remove and replace the rear wheel bearing on the Husqvarna FE 450 enduro bike. First, place the bike on a stand and begin by …
How to Replace the Exhaust on the Husqvarna FE 450
How to Replace the Exhaust on the Husqvarna FE 450
Fe 450 In this video, find the main instructions on how to remove and replace the exhaust on the Husqvarna FE 450 enduro bike. First, place your bike on a s…
How to Replace the Rear Brake Pads on the Husqvarna FE 450
How to Replace the Rear Brake Pads on the Husqvarna FE 450
Fe 450 Here are the steps to remove and replace the rear brake pads on the Husqvarna FE 450 enduro bike. First, place the bike on a stand and start by remov…

How to Replace the Air Filter on a Honda SH 300i Scooter?

In this tutorial, you will see how to replace the air filter on a Honda SH 300i scooter, a very simple and quick operation. Before proceeding, ensure the engine is completely cold for safety. Start by unscrewing both the 6 screws around the perimeter of the airbox and the 3 bolts of the circular cover, then remove the cover and unscrew the additional screw that has just been freed. Next, separate the box, remove the old filter, and clean the housing of any dirt residue. Finally, follow the reverse procedure to install the replacement.

Watch the video!


by ScegliAuto

More videos