Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In today's video, we will go through the steps to perform routine maintenance (oil and oil filter change) on a Husqvarna TE 310 enduro bike. First, unscrew the oil drain bolt located under the engine using a socket spanner; let the oil drain into a container and clean the magnet found on the end of the plug from any metal debris. Next, unscrew the three screws on the oil filter cover with a socket spanner, remove it, and replace it with the new one; pour the new engine oil into the crankcase!

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in the Husqvarna TXC 310?
How to Change the Engine Oil in the Husqvarna TXC 310?
Txc 310 In this tutorial, you will see how to change the engine oil in the Husqvarna TXC 310, an extremely simple and quick operation. First, ensure that the…
How to Change the Engine Oil and Oil Filter on the BMW GS 310
How to Change the Engine Oil and Oil Filter on the BMW GS 310
Gs 310 The following instructions will show you how to change the engine oil and oil filter while performing the routine maintenance service on the BMW GS 3…
How to Change the Engine Oil and Oil Filter on a Husqvarna TE450
How to Change the Engine Oil and Oil Filter on a Husqvarna TE450
Husqvarna Te450 Today, I will show you how to change the engine oil and the filter on your Husqvarna TE450. First, take a container for collecting the used oil and p…

Servicing a Honda SH300 Scooter

How to service the SH 300 scooter. This operation should be done with the engine cold. Remove the cover and take out the air filter, cleaning the compartment where the new one will be placed. Refit the three screws you removed earlier and reassemble the cover. Remove the oil cap, take a 12 mm spanner and unscrew the oil plug from underneath. Allow the oil to drain into a suitable container, which you will then dispose of at an authorised centre. Remove the filter, clean the cavity where the new one will be fitted, and tighten it with the spanner. Refit the oil cap screw. Always change the washer on the cap. Now, refill with oil. You will need a synthetic oil like Motul 5100 10W40, which costs £12.40 per litre on Amazon. If you are doing a complete change, you will need two cans, as you will require 1.6 litres including the filter. After adding the oil, let it rest for a few minutes, then run the engine for a few minutes and check the level. If necessary, top it up: it should be halfway between min and max.

Watch the video!


by ScegliAuto

More videos