Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in the Husqvarna TXC 310?

Model: Husqvarna Txc 310
Part: Engine oil

Video tutorial

In this tutorial, you will see how to change the engine oil in the Husqvarna TXC 310, an extremely simple and quick operation. First, ensure that the engine is sufficiently cool, then place a container underneath it, remove the protective cover, locate the indicated hose, and disconnect it by loosening the relevant metal clamp.

Allow all the oil in the system to drain out, open the filter cap, insert the new part, and reassemble everything. Finally, pour in the necessary amount of oil through the designated upper hole.


Posted on 10 June 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on the Husqvarna TE 310
How to Change the Engine Oil and Oil Filter on the Husqvarna TE 310
Te 310 In today's video, we will go through the steps to perform routine maintenance (oil and oil filter change) on a Husqvarna TE 310 enduro bike. First, u…
How to Replace the Engine Oil of the Husqvarna FE 501
How to Replace the Engine Oil of the Husqvarna FE 501
Fe 501 Discover the instructions for performing the routine maintenance service by replacing the engine oil and oil filter of the Husqvarna FE 501 motorcycl…
How to Change the Engine Oil in a BMW G 310 GS
How to Change the Engine Oil in a BMW G 310 GS
Gs 310 In this tutorial, you will see how to change the engine oil in a BMW G 310 GS, a very simple and quick operation. First, ensure that the engine is co…

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos