Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a BMW G 310 GS

Model: Bmw Gs 310
Part: Engine oil

Video tutorial

In this tutorial, you will see how to change the engine oil in a BMW G 310 GS, a very simple and quick operation. First, ensure that the engine is cool enough to work safely, then remove the lower cover and place a container underneath the bike.

Next, locate the drain hole bolt, loosen it using a hex key, and allow all the oil in the system to drain out. At this point, simply unscrew the old filter, tighten the new one, reassemble everything, and add the required amount of oil through the designated upper hole.


Posted on 17 April 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in the BMW G 310 GS?
How to Change the Engine Oil in the BMW G 310 GS?
Gs 310 In this tutorial, see how to change the engine oil in the BMW G 310 GS, a very simple and quick operation. First, ensure that the engine is cool enou…
How to Change the Engine Oil and Oil Filter on the BMW GS 310
How to Change the Engine Oil and Oil Filter on the BMW GS 310
Gs 310 The following instructions will show you how to change the engine oil and oil filter while performing the routine maintenance service on the BMW GS 3…
How to Replace the Rear Brake Pads on a BMW GS 310?
How to Replace the Rear Brake Pads on a BMW GS 310?
Gs 310 To replace the rear brake pads on a BMW GS 310, loosen the screws that secure the rear brake caliper, allowing you to completely detach the caliper f…

How to Replace the Air Filter on a Honda SH 300i Scooter?

In this tutorial, you will see how to replace the air filter on a Honda SH 300i scooter, a very simple and quick operation. Before proceeding, ensure the engine is completely cold for safety. Start by unscrewing both the 6 screws around the perimeter of the airbox and the 3 bolts of the circular cover, then remove the cover and unscrew the additional screw that has just been freed. Next, separate the box, remove the old filter, and clean the housing of any dirt residue. Finally, follow the reverse procedure to install the replacement.

Watch the video!


by ScegliAuto

More videos