Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in the BMW G 310 GS?

Model: Bmw Gs 310
Part: Engine oil

Video tutorial

In this tutorial, see how to change the engine oil in the BMW G 310 GS, a very simple and quick operation. First, ensure that the engine is cool enough to operate safely, then remove the relevant lower cover and place a container underneath the motorcycle.

Next, locate the drain hole bolt, unscrew it using an Allen key, and allow all the oil in the system to drain out. At this point, simply unscrew the old filter, tighten the replacement, reassemble everything, and pour in the necessary amount of oil through the designated upper hole.


Posted on 10 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on the BMW GS 310
How to Change the Engine Oil and Oil Filter on the BMW GS 310
Gs 310 The following instructions will show you how to change the engine oil and oil filter while performing the routine maintenance service on the BMW GS 3…
How to Change the Engine Oil in a BMW G 310 GS
How to Change the Engine Oil in a BMW G 310 GS
Gs 310 In this tutorial, you will see how to change the engine oil in a BMW G 310 GS, a very simple and quick operation. First, ensure that the engine is co…
Battery Replacement on BMW GS 310
Battery Replacement on BMW GS 310
Gs 310 Today, I will show you a really easy task that not everyone knows: the battery replacement, using a BMW GS 310 as an example. Let's get started! Inse…

How to Change the Engine Oil on a BMW R1200T?

To change the engine oil on a BMW R1200T, follow these steps. Ensure the bike is on a level surface and the engine is warm but not too hot. Remove the oil filler cap and the oil drain plug, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew it to fully drain the used oil. Once drained, remove and replace the oil filter, ensuring to clean the mounting surface thoroughly. Install the new filter and screw the oil drain plug back in. Fill the engine with new oil through the filler cap until reaching the recommended amount, checking the level with the dipstick if necessary. Secure both caps tightly. Start the engine for a few minutes to circulate the new oil, then turn it off, and the replacement is complete.

Watch the video!


by ScegliAuto

More videos