Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads on a BMW GS 310?

Model: Bmw Gs 310
Part: Brake pads

Video tutorial

To replace the rear brake pads on a BMW GS 310, loosen the screws that secure the rear brake caliper, allowing you to completely detach the caliper from its seat. Once the caliper is removed, you can slide out the pads located inside.

This will enable you to insert the new replacement parts into the caliper, repositioning it onto the disc; finally, secure it in place with the corresponding pin and check that everything is functioning correctly.


Updated on 21 September 2026 by ScegliAuto


Related tutorials

How to Replace the Levers on a BMW GS 310?
How to Replace the Levers on a BMW GS 310?
Gs 310 To replace the levers on a BMW GS 310, first loosen the adjuster located at the connection point between the cable and the lever. Once loosened, remo…
How to Replace the Brake Lever on the BMW GS 310?
How to Replace the Brake Lever on the BMW GS 310?
Gs 310 To replace the brake lever on the BMW GS 310, first loosen the bolt securing the lever and its corresponding nut located at the bottom of the lever. …
How to Change the Engine Oil and Oil Filter on the BMW GS 310
How to Change the Engine Oil and Oil Filter on the BMW GS 310
Gs 310 The following instructions will show you how to change the engine oil and oil filter while performing the routine maintenance service on the BMW GS 3…

How to Replace the Thermostat on the Gasgas EC 300

This guide provides the main instructions on how to remove and replace the radiator thermostat on the Gasgas EC 300 enduro bike. First, place your bike on a stand and disconnect the radiator hose, draining the fluid into a container for about ten minutes; then unscrew the thermostat screws to remove it from the radiator, as shown in the video. At this point, install the new original thermostat valve, securing it to the radiator, then pour in the new coolant and start the engine to circulate it!

Watch the video!


by ScegliAuto

More videos