Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Levers on a BMW GS 310?

Model: Bmw Gs 310
Part:

Video tutorial

To replace the levers on a BMW GS 310, first loosen the adjuster located at the connection point between the cable and the lever. Once loosened, remove the bolts securing the lever from underneath and slide it off the cable.

When the old lever is free from the cable, connect the new one to the same cable and position it in its housing, securing it with the appropriate bolt. Finally, screw the adjuster back onto the end of the cable and repeat the process on the other side.


Updated on 1 May 2026 by ScegliAuto


Related tutorials

How to Replace the Brake Lever on the BMW GS 310?
How to Replace the Brake Lever on the BMW GS 310?
Gs 310 To replace the brake lever on the BMW GS 310, first loosen the bolt securing the lever and its corresponding nut located at the bottom of the lever. …
How to Replace the Battery on the BMW GS 310?
How to Replace the Battery on the BMW GS 310?
Gs 310 To replace the battery on the BMW GS 310, insert the key into the designated lock and turn it to remove the seat. Once the seat is removed, loosen al…
How to Replace the Rear Brake Pads on a BMW GS 310?
How to Replace the Rear Brake Pads on a BMW GS 310?
Gs 310 To replace the rear brake pads on a BMW GS 310, loosen the screws that secure the rear brake caliper, allowing you to completely detach the caliper f…

How to Replace the Thermostat on the Gasgas EC 300

This guide provides the main instructions on how to remove and replace the radiator thermostat on the Gasgas EC 300 enduro bike. First, place your bike on a stand and disconnect the radiator hose, draining the fluid into a container for about ten minutes; then unscrew the thermostat screws to remove it from the radiator, as shown in the video. At this point, install the new original thermostat valve, securing it to the radiator, then pour in the new coolant and start the engine to circulate it!

Watch the video!


by ScegliAuto

More videos