Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Brake Lever on the BMW GS 310?

Model: Bmw Gs 310
Part:

Video tutorial

To replace the brake lever on the BMW GS 310, first loosen the bolt securing the lever and its corresponding nut located at the bottom of the lever. Use a 10 mm spanner to unscrew the nut: once loosened, you can remove the bolt and consequently take off the lever.

After the old lever is removed, install a new replacement part. Secure the new lever by inserting the bolt and fastening it with the corresponding nut. After installation, check its proper functioning.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

Gs 310 To replace the rear brake pads on a BMW GS 310, loosen the screws that secure the rear brake caliper, allowing you to completely detach the caliper f…
Gs 310 To replace the levers on a BMW GS 310, first loosen the adjuster located at the connection point between the cable and the lever. Once loosened, remo…
Gs 310 To replace the battery on the BMW GS 310, insert the key into the designated lock and turn it to remove the seat. Once the seat is removed, loosen al…

How to Replace the Thermostat on the Gasgas EC 300

This guide provides the main instructions on how to remove and replace the radiator thermostat on the Gasgas EC 300 enduro bike. First, place your bike on a stand and disconnect the radiator hose, draining the fluid into a container for about ten minutes; then unscrew the thermostat screws to remove it from the radiator, as shown in the video. At this point, install the new original thermostat valve, securing it to the radiator, then pour in the new coolant and start the engine to circulate it!

Watch the video!


by ScegliAuto

More videos