Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Engine Oil of the Husqvarna FE 501

Model: Husqvarna Fe 501
Part: Engine oil

Video tutorial

Discover the instructions for performing the routine maintenance service by replacing the engine oil and oil filter of the Husqvarna FE 501 motorcycle. First, place the bike on its stand and start by unscrewing the oil drain bolt located under the engine, allowing the old oil to drain into a container for about ten minutes; then remove the filter cover to take out the cartridge.

Finally, open the fill hole and pour in the new engine oil; fill it up to the maximum level using high-quality oil!


Updated on 2 June 2026 by ScegliAuto


Related tutorials

Fe 501 Let's briefly discover the steps to carry out the routine maintenance service by replacing the engine oil and oil filter on the Husqvarna FE 501 endu…
Fe 501 The oil change of the Husqvarna FE 501 can be done by loosening the screws that secure the lower engine protection plate and then unscrewing the drai…
Fe 501 In this tutorial, you will see how to change the engine oil in the Husqvarna FE 501, a very simple and quick operation. First, ensure the engine is c…

How to Change the Engine Oil on the KTM EXC-F 350?

To change the engine oil on the KTM EXC-F 350, loosen the drain plug located at the central lower part of the oil sump: once this plug is removed, all the used oil can flow into a suitably positioned container. When all the oil has drained out, remove the oil filter from its housing and replace it with a new one: this filter is located on the left side of the bike. On the opposite side, there will be a breather through which to insert the necessary amount of new engine oil.

Watch the video!


by ScegliAuto

More videos