Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Husqvarna Fe 501 - Video guides

Husqvarna Fe 501
How do you replace the front brake caliper on the Husqvarna FE 501?
To replace the front brake caliper of the Husqvarna FE 501, you will need to loosen the support screws that secure the brake caliper to the corresponding disc, …Read all…
Posted on 25 January 2026 by ScegliAuto
Husqvarna Fe 501
How do you replace the tank on the Husqvarna FE 501?
To replace the tank of the Husqvarna FE 501, you will need to loosen the screws that secure the side fairing panels of the motorcycle, which are located near …Read all…
Posted on 22 January 2026 by ScegliAuto
Husqvarna Fe 501
How do you replace the engine oil of the Husqvarna FE 501?
The oil change of the Husqvarna FE 501 can be done by loosening the screws that secure the lower engine protection plate and then unscrewing the drain plug …Read all…
Posted on 7 September 2025 by ScegliAuto
Husqvarna Fe 501
How do you replace the fuel pump of the Husqvarna FE 501?
It will be possible to replace the fuel pump of the Husqvarna FE 501 by loosening the screws that secure the side panels in the front of the motorcycle, right …Read all…
Posted on 13 July 2025 by ScegliAuto
Husqvarna Fe 501
How to Remove the Engine from the Husqvarna FE 501?
To remove the engine from the Husqvarna FE 501, loosen the screws that secure it to the supports. This will allow you to disconnect the cables related to the …Read all…
Posted on 23 October 2026 by ScegliAuto
Husqvarna Fe 501
How to Change the Engine Oil of a Husqvarna FE 501?
To change the engine oil of a Husqvarna FE 501, start by placing the bike on a stable stand and ensure the engine is warm for better oil flow. Under the …Read all…
Posted on 15 October 2026 by ScegliAuto
Husqvarna Fe 501
How to Remove the Engine from the Husqvarna FE 501
To remove the engine from the Husqvarna FE 501, loosen the bolts securing it within its housing. Once these mounting bolts are loosened, disconnect all hoses …Read all…
Posted on 8 October 2026 by ScegliAuto
Husqvarna Fe 501
How to Replace the Levers on a Husqvarna FE 501?
To replace the levers on a Husqvarna FE 501, loosen the nuts that secure the pivot pins of the levers, which fix them to the side housings of the handlebars: …Read all…
Posted on 7 October 2026 by ScegliAuto
Husqvarna Fe 501
How to Change the Engine Oil in the Husqvarna FE 501?
In this tutorial, you will see how to change the engine oil in the Husqvarna FE 501, a very simple and quick operation. First, ensure the engine is cool enough …Read all…
Posted on 11 September 2026 by ScegliAuto
Husqvarna Fe 501
How to Change the Oil on a Husqvarna FE501
In this video, you will see how to change the oil and filter on the Husqvarna FE501: first, position a container under the oil drain plug. You will need to …Read all…
Posted on 1 September 2026 by ScegliAuto
Husqvarna Fe 501
How to Remove the Engine from a Husaberg FE 501?
Removing the engine from the Husaberg FE 501 involves completely detaching the engine block from its housing by loosening the bolts and disconnecting the …Read all…
Posted on 13 August 2026 by ScegliAuto
Husqvarna Fe 501
How to Replace the Front Headlight on the Husqvarna FE 501
In today's tutorial, you will learn how to remove and replace the front headlight and its bulb on the Husqvarna FE 501 enduro bike. First, place your bike on a …Read all…
Posted on 3 October 2026 by ScegliAuto
Husqvarna Fe 501
How to change the engine oil and oil filter on the Husqvarna FE 501
Let's briefly discover the steps to carry out the routine maintenance service by replacing the engine oil and oil filter on the Husqvarna FE 501 enduro bike. …Read all…
Posted on 14 August 2026 by ScegliAuto
Husqvarna Fe 501
How to Replace the Engine Oil of the Husqvarna FE 501
Discover the instructions for performing the routine maintenance service by replacing the engine oil and oil filter of the Husqvarna FE 501 motorcycle. First, …Read all…
Posted on 3 August 2026 by ScegliAuto
Husqvarna Fe 501
How to Change the Engine Oil on the Husqvarna FE 501
Today, follow these steps to perform the routine maintenance service by changing the engine oil on the Husqvarna FE 501 enduro bike. First, place the bike on a …Read all…
Posted on 30 July 2026 by ScegliAuto
Husqvarna Fe 501
How to Replace the Headlight Bulb on the Husqvarna FE 501
In this brief guide, you will find instructions to remove and replace the LED bulb of the front headlight on the Husqvarna FE 501 enduro bike. First, move to …Read all…
Posted on 21 July 2026 by ScegliAuto
Husqvarna Fe 501
How to Replace the Brake and Clutch Levers on Husqvarna FE 501
In today's video, you will see step-by-step instructions to remove and replace the brake and clutch levers on a Husqvarna FE 501. First, start by removing the …Read all…
Posted on 16 June 2026 by ScegliAuto

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos