Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In today's tutorial, you will learn how to remove and replace the front headlight and its bulb on the Husqvarna FE 501 enduro bike. First, place your bike on a stand and begin by removing the front headlight. To do this, unscrew the screws located on the sides and disconnect the electrical connector of the bulb to remove it, as shown in the video. At this point, remove and, if necessary, replace the bulb with a new one of the correct type and with the same fitting. Refit the new headlight unit by following the reverse procedure of disassembly!

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on the Husqvarna FE 501
How to Replace the Headlight Bulb on the Husqvarna FE 501
Fe 501 In this brief guide, you will find instructions to remove and replace the LED bulb of the front headlight on the Husqvarna FE 501 enduro bike. First,…
How do you replace the front brake caliper on the Husqvarna FE 501?
How do you replace the front brake caliper on the Husqvarna FE 501?
Fe 501 To replace the front brake caliper of the Husqvarna FE 501, you will need to loosen the support screws that secure the brake caliper to the correspon…
How do you replace the tank on the Husqvarna FE 501?
How do you replace the tank on the Husqvarna FE 501?
Fe 501 To replace the tank of the Husqvarna FE 501, you will need to loosen the screws that secure the side fairing panels of the motorcycle, which are loca…

How to Change the Engine Oil in the Harley-Davidson Iron 883?

In this tutorial, you will learn how to change the engine oil in the Harley-Davidson Iron 883, a very simple and quick operation to perform every 12 months. First, wait for the engine to cool down, then open the filler cap located on the upper right side, disconnect the drain hose, and remove the plug by loosening the corresponding metal clamp. Once all the oil has drained from the system, replace the plug and proceed with changing the filter, which is located on the front of the engine. Finally, add new oil through the filler hole.

Watch the video!


by ScegliAuto

More videos