Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this brief guide, you will find instructions to remove and replace the LED bulb of the front headlight on the Husqvarna FE 501 enduro bike. First, move to the front of your bike and start loosening the two side clips of the headlight assembly; then disconnect the electrical connector of the dipped beam bulb and release the spring clip to remove it, as shown in the video. At this point, replace the bulb with a new one of the correct type (in this case, an H4 LED); then refit the front headlight!

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight on the Husqvarna FE 501
How to Replace the Front Headlight on the Husqvarna FE 501
Fe 501 In today's tutorial, you will learn how to remove and replace the front headlight and its bulb on the Husqvarna FE 501 enduro bike. First, place your…
How do you replace the front brake caliper on the Husqvarna FE 501?
How do you replace the front brake caliper on the Husqvarna FE 501?
Fe 501 To replace the front brake caliper of the Husqvarna FE 501, you will need to loosen the support screws that secure the brake caliper to the correspon…
How to Replace the Engine Oil of the Husqvarna FE 501
How to Replace the Engine Oil of the Husqvarna FE 501
Fe 501 Discover the instructions for performing the routine maintenance service by replacing the engine oil and oil filter of the Husqvarna FE 501 motorcycl…

How to Reset the Service Light on the Yamaha Xmax 250?

To reset the service light on the Yamaha Xmax 250, you need to insert the ignition key into the appropriate slot, so that you can turn it and switch on the instrument panel. Once this is done, press and hold the central button located on the left side of the instrument panel: the button should be held for about 20 seconds. When released, you will notice that the flashing service light has turned off: to verify that the reset has occurred correctly, you will need to switch off and then switch on the vehicle's instrument panel.

Watch the video!


by ScegliAuto

More videos