Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on the Husqvarna FE 501

Model: Husqvarna Fe 501
Part: Engine oil

Video tutorial

Today, follow these steps to perform the routine maintenance service by changing the engine oil on the Husqvarna FE 501 enduro bike. First, place the bike on a stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter thoroughly, as shown in the video.

Next, unscrew the screws from the oil filter cover, replacing the cartridge with a new one; finally, unscrew the filler cap and top up the oil!


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil of the Husqvarna FE 501
How to Replace the Engine Oil of the Husqvarna FE 501
Fe 501 Discover the instructions for performing the routine maintenance service by replacing the engine oil and oil filter of the Husqvarna FE 501 motorcycl…
How to Change the Engine Oil in the Husqvarna FE 501?
How to Change the Engine Oil in the Husqvarna FE 501?
Fe 501 In this tutorial, you will see how to change the engine oil in the Husqvarna FE 501, a very simple and quick operation. First, ensure the engine is c…
How to change the engine oil and oil filter on the Husqvarna FE 501
How to change the engine oil and oil filter on the Husqvarna FE 501
Fe 501 Let's briefly discover the steps to carry out the routine maintenance service by replacing the engine oil and oil filter on the Husqvarna FE 501 endu…

How to Replace the Air Filter on a Honda SH 300i Scooter?

In this tutorial, you will see how to replace the air filter on a Honda SH 300i scooter, a very simple and quick operation. Before proceeding, ensure the engine is completely cold for safety. Start by unscrewing both the 6 screws around the perimeter of the airbox and the 3 bolts of the circular cover, then remove the cover and unscrew the additional screw that has just been freed. Next, separate the box, remove the old filter, and clean the housing of any dirt residue. Finally, follow the reverse procedure to install the replacement.

Watch the video!


by ScegliAuto

More videos