Do it yourself
| ||||
|
Model: Husqvarna Fe 501
In this tutorial, we can see how to replace the engine oil in the Husqvarna FE 501, a very simple and fast operation. First of all, we wait for the engine to be cold enough to work safely, then we position a container underneath it, remove the lower cover, and, using a socket wrench, unscrew the bolts of the two drain holes. We then extract the small filter, clean it from any dirt residue, and let all the oil in the system drain out. Finally, we open the housing of the main filter, replace it, reassemble everything, and pour the new oil through the appropriate hole.
Posted on 25 January 2024 by ScegliAuto
|
How do I replace the headlight bulb on the Keeway Cityblade?In order to replace the headlight bulb of the Keeway Cityblade you must first loosen the bolt located on the front of the bike, immediately under the windshield. The other screws to loosen are located immediately below the instrument panel and on the sides of the steering wheel. Once all these screws have been loosened, it will be possible to remove the entire front fairing, so as to be able to access the rear part of the headlight. Here it will be possible to disconnect the connector and remove the bulb from inside its seat, replacing it with a new spare part. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.013
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |