Do it yourself
Frequently asked questions about cars and motorcycles
The oil change of the Husqvarna FE 501 can be done by loosening the screws that secure the lower engine protection plate and then unscrewing the drain plug below it: once the plug is removed, all the old oil can be drained into a properly positioned container. In this way, the oil filter located at the bottom of the vehicle can also be removed: this will allow for the insertion of a new filter and topping up with fresh oil. The required amount of oil should be poured through the vent located on the right side.

Posted on 7 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Fe 501 Discover the instructions for performing the routine maintenance service by replacing the engine oil and oil filter of the Husqvarna FE 501 motorcycl…
Fe 501 Today, follow these steps to perform the routine maintenance service by changing the engine oil on the Husqvarna FE 501 enduro bike. First, place the…
Fe 501 In this tutorial, you will see how to change the engine oil in the Husqvarna FE 501, a very simple and quick operation. First, ensure the engine is c…

How to Replace the Tyres on the Husaberg FE 450

In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos