Do it yourself
| ||||
|
Model: Husqvarna Fe 501
In this video, we will see how to change the oil and filter on the Husqvarna FE501: first, we position a container under the oil cap. We will then need to dispose of the used oil at an authorized center. The cap is located right under the engine and is easily accessible. When changing the oil, it is advisable to also change the cap and gasket. The oil that we need to put in its place is an SAE 15W60, and we load it through the tank cap, using a funnel. In the meantime, we will have also changed the oil filter, replacing it with a new one from its position.
Posted on 5 December 2023 by ScegliAuto
|
Honda Cb 125R crown and pinion replacementLet's find out in this guide how to remove and replace the crown and pinion of the Honda Cb 125R motorcycle, following the instructions below. First of all we put the rear stand and begin to disassemble the rear wheel, unscrewing the central pin of the wheel; then we go to disconnect and remove the chain, then unscrewing the two screws of the pinion to remove it, as shown in the video. At this point we unscrew the screws of the crown to remove it and replace it with the new one, having the right toothing; then we reassemble everything, applying the reverse procedure! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |